• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

G177 tires on Deuce

petrellaanthony174

New member
3
0
0
Location
Jane Lew, WV
I have the Saginaw 710 power steering kit from Waterloo Specialties... I’m having the tires put on and they are hitting the pitman arm.

also, will dual 177 fit in the rear... I was told yes when I bought them... now I’m being told otherwise. Please help
 

someoldmoose

New member
583
2
0
Location
Lancaster, PA
If the tires are the same size as what was there I don't know why there would be an issue. I'm actually considering using commercial drive tires all the way around when I change to singles.

As for the steering kit, I am not familiar with that mod but again are the tires the same size and on the same wheels ( width and offset at least ) as before the kit ?
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
I have a friend who put 177s on his truck with the Waterloo kit. The left front did mildly rub the arm. He remounted the front tires on M135 rims which have a couple inches of offset and that took care of it. Alternatively you could adjust the axle stops but they're welded in position, so it would be a little more work.

The rears are fine but most will rub the trunnion cap bolts. See Valence's thread.

20141211_155950.jpg20141211_155959.jpg20141211_160021.jpg20141211_160033.jpg20141211_160051.jpg20141211_160115.jpg20141211_160129.jpg20141211_160150.jpg20141211_160200.jpg20141211_160210.jpg
 
Last edited:

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
If the tires are the same size as what was there I don't know why there would be an issue. I'm actually considering using commercial drive tires all the way around when I change to singles.

As for the steering kit, I am not familiar with that mod but again are the tires the same size and on the same wheels ( width and offset at least ) as before the kit ?
Original tires versus G177s

20141211_160412.jpg20141211_160419.jpg
 

someoldmoose

New member
583
2
0
Location
Lancaster, PA
Clinto : Original tires versus G177s

Thanks Clinto, I wasn't sure if he got 177's to match the original size or went bigger. No different than trying to fit 35's on a stock K10 / 20 / 30. One mod effects everything else.
 

tobyS

Well-known member
4,832
833
113
Location
IN
I really like the looks of the G177 with duals on the rear and using A3 rims with 365 (14.5) on the front. That requires two spares, but darn I like the flotation and no rubbing issues (a wider stance too).
 

sandcobra164

Well-known member
2,999
295
83
Location
Leesburg, GA
They can be dualed

Pictured is Elijah95's truck while it was still owned by Atomic. Taking these tires off 5 ton wheels wasn't bad. Breaking down old tires off of the deuce rims was a pain but that's what friends are for. I was glad when we finished that project.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks