• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Gamma goat center bearing assembly

combat32

Well-known member
1,639
106
63
Location
Booneville AR.
This topic got me worried so I started looking mine over, no zerk anywhere, now wondering if I might ought to go ahead and disassemble and grease/pack the bearing
 

combat32

Well-known member
1,639
106
63
Location
Booneville AR.
Yes it is, I'm glad I decided to take mine apart, the rubber looks to be in good shape, but the bearing is sized, rusted on to the drive shaft.
The splines inside the yoke are pretty rusty and pretty dry, glad I took mine apart, once I replace the bearing and get everything lubed up good I should be good to go.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks