Hello all. Have a few questions on the wiring. I’m am getting ready to pull my front harness and rebuild it, I’m doing so I’ve been going through and labeling everything since most of the metal tags are either gone or not readable. However the wiring to the voltmeter does not align with either schematic I have for the truck. On the early schematic it shows wires 8 and 9 going from the regulator to the voltmeter. On the late model schematic it shows a single wire coming from the spider harness. My truck seems to be different however, I have one wire going to the voltmeter going into the main harness. I have yet to find where this goes by tracing with a DMM. Does anyone have any insight on this? ![0DC96CF6-76B4-4C03-AEB3-BF5B47AC2936.jpeg 0DC96CF6-76B4-4C03-AEB3-BF5B47AC2936.jpeg](https://www.steelsoldiers.com/data/attachments/645/645825-aac0e4a0eecfb7b2642ff5ea8f65823c.jpg)
![0DC96CF6-76B4-4C03-AEB3-BF5B47AC2936.jpeg 0DC96CF6-76B4-4C03-AEB3-BF5B47AC2936.jpeg](https://www.steelsoldiers.com/data/attachments/645/645825-aac0e4a0eecfb7b2642ff5ea8f65823c.jpg)