Glow plug solenoid wiring

[OccRzr1775]

Sorry I looked for a thread related to this and I can't find one for my problem with my M1009.

Took photos before I detached the old glow plug solenoid and now I'm seeing two extra wires that I did not see before and I'm not certain where attach that.

Photo below. Shoot the two wires not connected in the bottom left. I'm thinking the red to the top of the solenoid and is that other a ground should to go on to the firewall?



Here's a picture of how it was wired before



I'd appreciate anyone putting him in the right direction of where I can find an answer for this.

Thank you

 

[Sharecropper]

Here is a fresh photo of my relay. I had previously removed the glow plug resistor and can't remember if that procedure required any of the wires to be moved. Hope this helps.