-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Glow Plugs
- Thread starter asg13
- Start date
MarcusOReallyus
Well-known member
- 4,524
- 816
- 113
- Location
- Virginia
They go bad, and it's not necessarily all at once. If it gets hard to start, test them according to the procedure in the TM. You'll need a good DMM (Digital Multi Meter).
rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
W
Thanks,I even printed it out on photo grade paper,really cool. Whats PS magazine?
Last edited:
Keith_J
Well-known member
- 3,657
- 1,323
- 113
- Location
- Schertz TX
PS is the US Army's preventative service magazine, something for the soldiers to read while on CQ duty or waiting for the wash rack to open up
. It is free and online for back issues, there is a link somewhere.
On glow plugs, not only is cold resistance important, also time to heat and dynamics. The PS excerpt is a bit off for us civvies since we may not have exact replacements and using odd plug or two could cause issues if resistance isn't the same between plugs. One could overheat while another doesn't get warm enough.
. It is free and online for back issues, there is a link somewhere.On glow plugs, not only is cold resistance important, also time to heat and dynamics. The PS excerpt is a bit off for us civvies since we may not have exact replacements and using odd plug or two could cause issues if resistance isn't the same between plugs. One could overheat while another doesn't get warm enough.