• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

GMC 6.5 Turbo/4L80E?

ATNC325

New member
13
18
3
Location
OR
I ran across a wrecked 2002 GMC van w/ 4L80E that I was inquiring about to use as a donor vehicle for a potential tranny sway in my m998. Turns out it also has the 6.5turbo diesel in it as well and I currently have the 6.5 n/a. Is there any compatibility between the civilian and military engines and/or turbo components? Or does the whole 12v vs. 24v make it a no go....just peeked my curiosity at bit, but I'm sure the lack of rumbles of hearing anybody else doing this probably is because they are just different animals. Let me know if there's anything engine/turbo wise worth grabbing while I'm taking out the transmission. Thanks in advance!
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,578
3,488
113
Location
Brooklyn, NY
The turbo engine will fit but you need to swap out anything electrical for 24 Volt
 

Bulldogger

Well-known member
Steel Soldiers Supporter
1,330
586
113
Location
Quantico VA
Check if it is a centerline, rear mounted turbo, or more typical side-mounted forward. Conventional side-mounted turbos will not fit in the HMMWV narrow engine bay. Sorry to rain on your parade, but I am not aware of a common rear mounted turbo civilian diesel truck.
Bulldogger
 

NDT

Well-known member
Steel Soldiers Supporter
10,457
6,530
113
Location
Camp Wood/LC, TX
GM Vans do indeed have the rear mount turbocharger. The 4L80E will need to be completely disassembled to have the tail shaft replaced with the shorter 4 wheel drive version. It's even possible the engine is a Navistar cast block, GM quit making 6.5s in 2000.
 

springer1981

Well-known member
844
1,150
93
Location
Maine
I'm not so sure it wouldn't be easier to convert it to 12v. Depends on if you plan on using all the stock accessories like the glow plugs and controller, alternator and any other 24v system. The 4L80 needs to use a controller and (just a guess) the new engine probably uses an ECM tied to the TCM. If you keep everything off the van you won't need an ECM, TCM, wiring, new glow plugs or any of the other related stuff. To go 12v, you mostly just need to change light bulbs. Just a thought to consider.
 

NDT

Well-known member
Steel Soldiers Supporter
10,457
6,530
113
Location
Camp Wood/LC, TX
The van has one computer that controls the 4L80E and the DS-4 electronic injection pump. Removing that computer and attempting to make it work in a HMMWV would be an absolute nightmare. The DS-4 sucked when it was new.
 

Bulldogger

Well-known member
Steel Soldiers Supporter
1,330
586
113
Location
Quantico VA
I used EZ-TCU for the transmission control and had/have few problems. Others used US Shift and it went well.
BDGR
 

Crazyguyla

Active member
817
124
43
Location
Altus, OK
You could put the njection pump off the 6.5n/a on the 6.5 turbo. I don't remember if the turbo wastegate is tcm controlled.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks