diluted
Member
- 48
- 1
- 8
- Location
- Austin, TX
Anyone know where to get a GMV C Pillar to use with a hard top and the side rails?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
GMV C Pillar source?
- Thread starter diluted
- Start date
BLK HMMWV
Well-known member
- 1,523
- 428
- 83
- Location
- Pasadena California
Your looking for a unicorn.
Retired War horse has some nice C pillar tubes. ( Top tube with center spoon )
Hard to find the bare pieces that the top tube slides into on the right and left end . Most cut up a set of sponson's.
That's what I ended up doing anyway. I ended up making some side panels from LMTV panels instead of using the side rails.
Turned out ok. I still need to paint them .
Retired War horse has some nice C pillar tubes. ( Top tube with center spoon )
Hard to find the bare pieces that the top tube slides into on the right and left end . Most cut up a set of sponson's.
That's what I ended up doing anyway. I ended up making some side panels from LMTV panels instead of using the side rails.
Turned out ok. I still need to paint them .
FirstGen FBody
Member
- 58
- 1
- 8
- Location
- pa
BLK HMMWV any pics or a build thread?
BLK HMMWV
Well-known member
- 1,523
- 428
- 83
- Location
- Pasadena California
No build thread sorry.
- 498
- 24
- 18
- Location
- Baltimore/ MD
The one piece C pillars are out there. You have to grind on the boards and work your contacts, and of cour$e pay dearly when you find one.