Charlie 6
Member
- 147
- 17
- 18
- Location
- Claremore/Oklahoma OK
Started working on my goat to get the passenger wiper working, before I knew it I tore everything apart and reworked the dash wiring according to diagram.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Goat dash rebuild
- Thread starter Charlie 6
- Start date
Charlie 6
Member
- 147
- 17
- 18
- Location
- Claremore/Oklahoma OK
By the next weekend I got everything working and put back together.
Attachments
- 10,865
- 762
- 113
- Location
- Appomattox, VA
Wow, what a difference! Great job on the goat!
Charlie 6
Member
- 147
- 17
- 18
- Location
- Claremore/Oklahoma OK
For the rubber parts I bought Plastic Dip from Lowe's. Stuff sprays easy and makes the parts look like new.
eagle4g63
Well-known member
- 1,544
- 34
- 48
- Location
- North/west Indiana
Boy if that is what you call fixing a window wiper!!!!!!!!!!!!!
I have a wiper that could use a fixin' when you get a chance
I have a wiper that could use a fixin' when you get a chance
Charlie 6
Member
- 147
- 17
- 18
- Location
- Claremore/Oklahoma OK
Another Goat on the road.
Another goat on the road in Oklahoma. Got my goat in Jan 2012 after a 1,500 mile trip. Been working on it outside off and on since then. Finally finished a complete overhaul of brake system that included cyls, pads, springs, master cyl, flexible lines both air & hydraulic, a few fabricated steel lines and Dot 5.
Now able to go down the road with out holding my breath.
Next on the list put on some new tires that I scored a couple of weeks ago and converting turn signal switch to new style.
If anyone know of a post that shows how to covert over to new style turn signal switch please let me know.
Another goat on the road in Oklahoma. Got my goat in Jan 2012 after a 1,500 mile trip. Been working on it outside off and on since then. Finally finished a complete overhaul of brake system that included cyls, pads, springs, master cyl, flexible lines both air & hydraulic, a few fabricated steel lines and Dot 5.
Now able to go down the road with out holding my breath.
Next on the list put on some new tires that I scored a couple of weeks ago and converting turn signal switch to new style.
If anyone know of a post that shows how to covert over to new style turn signal switch please let me know.
Attachments
Last edited: