Al Capone
Active member
- 384
- 58
- 28
- Location
- Pearl river la
Are the wiper blades special to this vehicle or can they be bought from a auto parts store ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Goat wiper blades
- Thread starter Al Capone
- Start date
- 1,383
- 385
- 83
- Location
- Feasterville, Pennsylvania
Al Capone
Active member
- 384
- 58
- 28
- Location
- Pearl river la
I just went ahead and bought usgi blades for $9.50 each . Found wiper arms for around same . Thanks
m38inmaine
Well-known member
- 2,145
- 102
- 63
- Location
- Maine USA
All the wiper information is in my restoration thread. The GI blades don't come with the necessary adapter unless you already have them.
Attachments
Last edited:
Al Capone
Active member
- 384
- 58
- 28
- Location
- Pearl river la
Nope don't have any wiper parts at all
m38inmaine
Well-known member
- 2,145
- 102
- 63
- Location
- Maine USA
The 57-28 commercial blade is correct and will come with the adaptor, save the GI ones for replacements and re-use the adapter. There are also two styles of wiper arms and wiper motors, it gets confusing.
Al Capone
Active member
- 384
- 58
- 28
- Location
- Pearl river la
Dammit ! Lol
Al Capone
Active member
- 384
- 58
- 28
- Location
- Pearl river la
In the two different wiper arm design . The two I have found have a hole in the front where it goes into splined motor shaft and wiper has a hole thru that looks like it is retained buy a nut ? The shafts on my 1970 are not like this . Must use the type that goes on and has a clip in back to retain ? Does this sound correct ? Eastern surplus which ones do y'all sell?
m38inmaine
Well-known member
- 2,145
- 102
- 63
- Location
- Maine USA
Look at the comic book picture I posted above, does yours look like the one on the left? The type I have are on the right. If your arms are missing you may just be missing the splined adapter on the wiper motor shaft, really need to see a picture of yours to help you.
Al Capone
Active member
- 384
- 58
- 28
- Location
- Pearl river la
Yeah I have the old style wiper motors still and they work . So question is the new wiper arms : will they fit ? But they have no way of securing them to my old style shaft looks like .
m38inmaine
Well-known member
- 2,145
- 102
- 63
- Location
- Maine USA
I have never seen the old style so I do not know if they will fit. Try searching the NSN for the old style and see if any show up or cross over to a civilian arm.