goldneagle
Well-known member
- 4,510
- 1,007
- 113
- Location
- Slidell, LA
+1
Good words of advice!
Also ... since I pick up oil in other peoples shops/yards ... I always put a pan under hoses when I have to disconnect or move them ... plugs and caps on EVERYTHING.
I'm also careful to drain my hoses and store them hanging into a 5 gallon bucket.
No matter how hard or long you shake them ... it seems there's always 3 drops left to makes a BIG mess.
oddshot
I hear ya. I am already using the 5 gallon buckets to store the pickup tubes. I was thunking of eventually getting the cam lock connectors with plugs and caps for the hoses that get disconnected. Right now my budget is blown and I cannot justify any more $$$$$ until I actually start to see the savings roll in.
My biggest headache is the filter socks. i use the long ones. I need to set up a drum with two 6" holes in the lid to hang the socks to drain/store.
I am sure that as I use the system I will come up with additional methods to keep the oil spillage to a minimum. Handling the drums is another headache!