• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ground Rod Kits

jonesal

Mission Specialist
Steel Soldiers Supporter
413
69
28
Location
Brookings, SD
Who currently carries the kits? Either the basics ones in three sections or the fancy ones in canvas... I've inquired around and everyone seems to be out.

Thanks,
Allen
 

jonesal

Mission Specialist
Steel Soldiers Supporter
413
69
28
Location
Brookings, SD
Either of these two would suit the bill (reproduced from other posts on SS). The basic kit is what I need for mobility and the fancy canvas kit would just be cool have.

Also, does anyone have the most current NSNs for either kit? I've seached at vendor sites and am coming up blank.

Let's push it here... does anyone have the correct hammer/extractor as well? NSN number?

Thanks,
Allen
 

Attachments

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
One should be so lucky to have a set in new condition. The ground rod set that came with my generator had to be re-threaded, after the rods were straightened that is.
I do have the hammer, it's not for sale, but I can provide pictures and dimensions if needed.


Update: I do have NOS Slide Hammer sets ( NO GROUND RODS). See the classified section.
 
Last edited:

OLDCHEV4X4

New member
690
2
0
Location
Glenmoore PA
I have the slide hammer and misc stuff, but no ground rods or couplers. I was told i could get the ground rod and couplers at a electrical supply, but no luck yet.
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
Grainger carries a rod set. Part # 2KXN1

I'll post photos and dimensions of the hammer on Tuesday.
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
I dont think they screw together. You need to be able to disassemble and reuse the rods and connector's.
According to the Grainger web site there are two 5/8" x 4' rods, a connector, a ground clamp, and a drive sleeve.
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
The hammer dimensions are:

Height 5"
Diameter 4"
Center hole 5/8"
Handle length 6"
Handle dia 3/4"
Weight 20lbs

Flat disc on driving rod:

Diameter 2-1/2"
Thickness 3/4"
Center hole diameter 5/8"

Thread size on rods is 5/8-11
 
Last edited:

OLDCHEV4X4

New member
690
2
0
Location
Glenmoore PA
According to the Grainger web site there are two 5/8" x 4' rods, a connector, a ground clamp, and a drive sleeve.
They dont screw together. When you pull them up, they might come apart.

So it looks like you would have to thread them, and make a threaded coupler.
 

Nonotagain

New member
1,444
41
0
Location
Parkville, MD
While if I were purchasing these rods I would thread them together its just as easy to drill the coupling collar and rods and install a screw in each joint so that they stay together when you use the slide hammer to remove them from the ground.

That's the KISS engineer in me.
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
They dont screw together. When you pull them up, they might come apart.

So it looks like you would have to thread them, and make a threaded coupler.
I see that now. Did some further checking and found that the manufacturer ERITECH, does make (bonded copper) threaded sectional rods. I did not see a kit listed although they may make one. Check them out: ERITECH® Copperbonded Ground Rods
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
Another fly in the soup is that the standard accessery box on the generator trailer is only 3' 4" long. So no 4' ground rods.:|
This ERITECH does make 3' threaded sectional rods. According to their price list they are reasonably priced, just have to find a distributor who stocks them.
 

54reo

Well-known member
1,503
49
48
Location
Chester IL
Either of these two would suit the bill (reproduced from other posts on SS). The basic kit is what I need for mobility and the fancy canvas kit would just be cool have.

Also, does anyone have the most current NSNs for either kit? I've seached at vendor sites and am coming up blank.

Let's push it here... does anyone have the correct hammer/extractor as well? NSN number?

Thanks,
Allen
I have several of these 3 piece kits still in the box. NSN 5975-00-878-3791. Complete with the wire, clamps, three sections of threaded rod, bronze couplers, drive bolt, and extraction disks. Anyone interested? I can post pics tomorrow.

I only have one slide hammer, sorry.
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
I have several of these 3 piece kits still in the box. NSN 5975-00-878-3791. Complete with the wire, clamps, three sections of threaded rod, bronze couplers, drive bolt, and extraction disks. Anyone interested? I can post pics tomorrow.

I only have one slide hammer, sorry.
PM sent
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks