Growler grease fittings

[BPinFL]

Does anyone have a lube chart? I got the fittings on the A frames and drive shafts, wondering what I missed.
Thanks, BP

 

[jmpogue89]

I found grease fittings on the stabilizer arms on top and on the bottom

 

[fasttruck]

Look at moving parts in steering and 3ea fittings per drive shaft: 1ea on each u joint and 1ea on the slip joint. If it has a pintle hook there may be some there.

 

[W427]

The lube charts in the TM are rather general, and sections are more specific. My ITV chassis (Zerk) short list as of today:

• Ball Joints - total 8
• Drive shafts - total 6 (4 U-joints + 2 splined slip joints)
• Rear Steer - total 2 (not all appear to have any or both)
• Tow Pintle - total 1 each

These are only chassis points, and there are several more greasing/lube points from cables to cages. Additions to this chassis list are welcome. Info on GAA grease is around (use care as many are "internet" opinions), and some researched info on ITV greases: ITV Greases