beckel
Member
- 81
- 3
- 6
- Location
- Austin, Texas
Hi Guys -
I am working on installing the powerpack in my 998 and an needing to swap out the Yokes on the differentials. I read through the TM's but it does not seem to apply if you are moving from one yoke type to another as I am doing with the conversion from a 3L80 to 4L80E and NP242 transfer case and associated driveshafts.
Can someone please guide me on the process of swapping the yokes? I have new crush collars but tightening the pinion nut back to the same location as the old one once I have installed the new yokes doesnt seem like it would work since the yokes are different.
Also, is a puller required to remove the old yoke or will it slide off once the nut and spacer are removed?
Any help is greatly appreciated!
Brian
I am working on installing the powerpack in my 998 and an needing to swap out the Yokes on the differentials. I read through the TM's but it does not seem to apply if you are moving from one yoke type to another as I am doing with the conversion from a 3L80 to 4L80E and NP242 transfer case and associated driveshafts.
Can someone please guide me on the process of swapping the yokes? I have new crush collars but tightening the pinion nut back to the same location as the old one once I have installed the new yokes doesnt seem like it would work since the yokes are different.
Also, is a puller required to remove the old yoke or will it slide off once the nut and spacer are removed?
Any help is greatly appreciated!
Brian