• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

H1 Wheels 1 ton axles M1009

The FLU farm

Well-known member
Steel Soldiers Supporter
3,338
1,319
113
Location
The actual midwest, NM.
If both of these tires yield too high a final vehicle height to fit in the garage I will head towards 295's.
If overall height is critical, forget about the nominal tire size and go by the static loaded radius numbers instead.
Either way, a typical "35-inch" tall tire, as in a 35x12.50, will usually fit fine even on a 10-inch wide wheel - if minor trimming of the very lowest parts of the fender is performed.
If that trimming is done correctly, nobody will notice that it's done. And it's especially easy without the civilian wheel well trim.
 
Top