• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Has anyone made a M1031 governor linkage assembly?

Thomas_G

Member
93
7
8
Location
Houston, TX
I have a 1031 and it is missing the governor to injection pump linkage assembly. Has anyone made a linkage successfully and what parts used if can list specs and parts used?
 

zoto6ixty

New member
27
0
1
Location
Pensacola, Fl.
Mine still has all the parts, but the controller in rear quit. So I used a manual knob with lock to take its place. You have to adjust it for the load, but it would let you use the generator. If you are interested, I could post some pictures.


Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks