Monster Man
New member
- 884
- 1
- 0
[No message]
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
heater install?
- Thread starter red devils dude
- Start date
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
[No message]
Monster Man
New member
- 884
- 1
- 0
[No message]
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
[No message]
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
[No message]
Monster Man
New member
- 884
- 1
- 0
[No message]
n3uka
Member
- 203
- 2
- 18
- Location
- Beltsville, MD
[No message]
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
[No message]
Monster Man
New member
- 884
- 1
- 0
[No message]
spicergear
New member
- 2,307
- 26
- 0
- Location
- Millerstown, PA
A littly fyi on the heater cores (THANKS JOE it's in!!!) there are slight variations between heater cores and the boxes they mount in. I got a core from Joe and thought it would slap in. The hole in the top of the mounted box for the bleeder(?) was off by about 1/4" from fitting when the other was a perfect fit. The one hose outlet had to be opened up too. I don't know if there's anyway to destinguish these types or if it was just a fluke, but it seems like the different manufacturers of the cores had slightly different specs. No biggy though.
MVtrucker
New member
- 357
- 3
- 0
- Location
- Bridgeton, NJ
Spicer,
I never knew that. I'm going to have a look at the rest of my heater housings and see if they do vary by manufacturer.
I never knew that. I'm going to have a look at the rest of my heater housings and see if they do vary by manufacturer.