• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Heater motor

Elk1111

Well-known member
281
487
63
Location
Las Cruces NM
My heater motor wasn’t working so I ordered a new one. After getting it all hooked up with the ground wire connected to a bolt on the heater box I started the truck to test it. It came on—smoke came out of the new motor followed by a large spark and now nothing. My first instinct says there was a bare wire in the new motor causing a short.
Does anyone have any other ideas what might have caused this?
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,125
9,384
113
Location
Mason, TN
On a 5 ton blower switch One wire is 24v. One is 12v. Do you have the appropriate wires in the battery box hooked up correctly?
 

Elk1111

Well-known member
281
487
63
Location
Las Cruces NM
The blower is one from a military parts source and when I test the switch low side is 12volt and high side is reading 24 volt. All connections seem ok.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,125
9,384
113
Location
Mason, TN
Order a civilian built one

Napa 655-1320

Oreilly or ebay # 35552 for four seasons brand
 

Crf450x

Well-known member
275
350
63
Location
Fall Branch, TN
I just got a four seasons one a few days ago. $30 on eBay. You’ll have to take your old one apart and get the “bolts” out of it that hold the case halves together. Or buy a piece of #10 threaded rod. The bolts that come in the four seasons motor aren’t long enough to mount it.
 

155mm

Chief and Indian
Steel Soldiers Supporter
1,178
389
83
Location
Guymon, OK
I built a new blower motor from an mrap blower, will try to attach the build thread
 

155mm

Chief and Indian
Steel Soldiers Supporter
1,178
389
83
Location
Guymon, OK
 

Elk1111

Well-known member
281
487
63
Location
Las Cruces NM
The vendor I ordered the motor from is sending me a new motor right away and a shipping label for the previous one. I don’t know if we’re supposed to say who we’re getting parts from but their initials are BM ‘s and I am extremely impressed with their customer service. Good service is rare nowadays and this vender is 1st class.
 

Elk1111

Well-known member
281
487
63
Location
Las Cruces NM
Quick update... the new motor came in and everything works perfectly. I just need to find some vent hose to put in for the drivers side defrost. The original is gone.
 
Top