Help gasser M34 bolts

[reom34]

Hello :

My reo m34 gasser engine need new bolts for the cylinder head.
I try find it in Memphis Equipment but they dont have.

I need the 7372754 (5 units) and 7321883 (2 units) and the washer 7521877 (14 units).

Please any help for find it will be wellcome.

Thanks

 

[Crazyguyla]

Did you email them or just look on their website? They have so much stuff, they can't list everything. Here are the part numbers for the bolts:
stud:7521077
bolt: 7521884

Hope this helps.

 

[Kaiser67M715]

If they still don't have, try George at White Owl.

Sent from my SM-S920L using Tapatalk

 

[reom34]

Did you email them or just look on their website? They have so much stuff, they can't list everything. Here are the part numbers for the bolts:
stud:7521077
bolt: 7521884

Hope this helps.

Memphis out of stock.I try in others dealers.Thanks for your help

Enviado desde mi LG-H850 mediante Tapatalk

 

[reom34]

If they still don't have, try George at White Owl.

Sent from my SM-S920L using Tapatalk

Thanks Kaiser67 .George just tell me bad news.Out stock too.

Enviado desde mi LG-H850 mediante Tapatalk

 

[goodwithwood35]

Got a picture of the bolt? I have a friend that has a lot of old NOS stuff.


Sent from my iPhone using Tapatalk

 

[reom34]

bolts pics

Thanks for your help
Here you are some pics.The sizes are 9/16-12 NC-3 x 5 7/16( 5 units) and 9/16-12 NC-3 x 7 1/8 ( 2 units)

Got a picture of the bolt? I have a friend that has a lot of old NOS stuff.


Sent from my iPhone using Tapatalk

 

[DavidWymore]

pretty sure goodwithwood has access to a ton of them.

 

[goodwithwood35]

Thanks David,

Here are what he gave me to take home. Don’t know what they’re for, he did mention some kind of a gas engine, maybe for an M37? Couldn’t find any info online. These are roughly the same length as yours, except they are 1/2” not 9/16”. About 5.8” long, 1/2” NC thread. He has a lot of other stuff, pushrods and etc. I’ll ask him if he has other stuff laying around. These are NOS.

Sent from my iPhone using Tapatalk

 

[reom34]

Thanks Goodwithwood35.
That bolt is for 1 1/4 ton 4x4 M715

Thanks David,

Here are what he gave me to take home. Don’t know what they’re for, he did mention some kind of a gas engine, maybe for an M37? Couldn’t find any info online. These are roughly the same length as yours, except they are 1/2” not 9/16”. About 5.8” long, 1/2” NC thread. He has a lot of other stuff, pushrods and etc. I’ll ask him if he has other stuff laying around. These are NOS.

Sent from my iPhone using Tapatalk

Enviado desde mi LG-H850 mediante Tapatalk

 

[goodwithwood35]

Thanks Goodwithwood35.
That bolt is for 1 1/4 ton 4x4 M715

Enviado desde mi LG-H850 mediante Tapatalk

Hey, good to know!


Sent from my iPhone using Tapatalk