• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

HELP! Need gaskets for spin-on oil filters

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Mounted jatonka's spin on oil filter adapters a while back. However, when I installed them, I misplaced the gaskets that go between the adapters and the engine block. I used a set of oddball gaskets that I had laying around and mooshed them into fit, and torqued the adapters down. Worked okay, a little seepage but not bad.

Today, started it up and oil all over the place. The gasket blew out and ripped, now I have nothing to act as a gasket.

I have a trip to make on Saturday morning with the deuce, I need a set of the appropriate gaskets ASAP. Can anyone point me to the right size gaskets at NAPA perhaps? Or if you have a spare set can you overnight them to me?

Perhaps jatonka can chime in with the right info? Please? Owe you a cigar! :-D
 

gimpyrobb

dumpsterlandingfromorbit!
27,786
755
113
Location
Cincy Ohio
If they are made to replace the canisters, wouldn't you just need the gasket listed in the part cross referance?
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Yup, that's the one, but I don't have that gasket.

John Tennis just called me, said that the NAPA number for the correct gasket I need is 5119. He said my mistake was trying to use a O-ring gasket to replace the flat fiber gasket that was original. His advice was much appreciated, will stop by NAPA first thing tomorrow....
 

militarytrux

New member
37
0
0
Location
Boston Ma
same thing happened to me last week, I headed over to NAPA and had to buy the whole filter just to get the flat gasket, they told me the gaskets were not available separately?

Anyway we're back up and running with no leaks : )
 

jatonka

Well-known member
1,802
87
48
Location
Ephratah, New York
Anytime you guys need the gaskets, tell Napa man to look in the book, or call the wix tech line. If you still can't get them, I have them at my place all the while. JT out
 

LanceRobson

Well-known member
1,638
206
63
Location
Pinnacle, Stokes County, NC
Mike, there is a bright side to this. The blowout happened at home instead of 200 miles from home on an Interstate.

Lance

EDIT to convert a NAPA oil gasket # to a WIX #, add a 1 in the front. 5119 becomes 15119 etc.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks