bones1
Member
- 854
- 4
- 18
- Location
- Southern Maryland
I want to make sure I remove the correct wire(neutral). My MEP-003A has the ASK kit on it and I can barely find anything, still haven't seen the oil pressure gauge,but they told me where to look. On the back of my ground lug on the generator is a large wire that feels like a big battery cable and a small white cloth covered wire going to a connector marked J 10, I think.On the white wire is marked x13J8 every few inches. The nut is loose on on the back of the lug, finger tight. Which wire do I remove to un bond the neutral.I can feel in there only but it feels like only two wires attached there.
Thanks for any tips.
Thanks for any tips.