youngunbd
New member
- 111
- 10
- 0
- Location
- Corvallis, Oregon
I bought a Hobart welder off craigslist recently. Normally Miller's literature department can send me a manual on the unit, but since it was a navy contract, they're hands off
I am trying to find a manual so I can get the front stickers remade and make sure the wiring is correct, I am repainting the welder to match the truck it is going on and need to sand the face plate and remove the rust. Other than that, 100% duty cycle 300 amps is hard to argue with for $600!!
If the photos are too hard to read, Model MA-300-G
Serial 82WS08604
year 1982
USN 51-76643
Hobart tag
spec 6525-1
Model 300G
![IMG_20160812_170318773.jpg IMG_20160812_170318773.jpg](https://www.steelsoldiers.com/data/attachments/440/440022-d061c28e5942fe28027090047410a3ee.jpg)
![IMG_20160812_170345875.jpg IMG_20160812_170345875.jpg](https://www.steelsoldiers.com/data/attachments/440/440023-49016fa4303e94841d5e483794a62f88.jpg)
I am trying to find a manual so I can get the front stickers remade and make sure the wiring is correct, I am repainting the welder to match the truck it is going on and need to sand the face plate and remove the rust. Other than that, 100% duty cycle 300 amps is hard to argue with for $600!!
If the photos are too hard to read, Model MA-300-G
Serial 82WS08604
year 1982
USN 51-76643
Hobart tag
spec 6525-1
Model 300G
![IMG_20160812_170318773.jpg IMG_20160812_170318773.jpg](https://www.steelsoldiers.com/data/attachments/440/440022-d061c28e5942fe28027090047410a3ee.jpg)
![IMG_20160812_170345875.jpg IMG_20160812_170345875.jpg](https://www.steelsoldiers.com/data/attachments/440/440023-49016fa4303e94841d5e483794a62f88.jpg)
Last edited: