HMMWV snorkel coupler

[captkennyboy]

Hi all, does anyone know were i could find the straight rubber coupler on the bottom for the snorkel. I have noticed some of the HMMWV use this to raise the standard intake cap

thanks in advance for the help

 

[CGFFEMT]

I used a standard flexible plumbing fitting like this: https://www.homedepot.com/p/The-Plu...2068304-92700062338492358&gclsrc=ds&gclsrc=ds

I think the 4" version works, but doublecheck the size.

 

[86humv]

The straight rubber coupler is for armored trucks { the intake snorkle is shorter }.
If you have a standard longer snorkle...you can't move it up due to the windshield bracket

 

[Coug]

you are just trying to raise the height of the standard cap, not install a snorkel, correct?

 

[Action]

you are just trying to raise the height of the standard cap, not install a snorkel, correct?

And create a blind spot when the cap is in the line of sight.

 

[Milcommoguy]

Humv's with blind spots?

I didn't hear that, CAMO

 

[Coug]

And create a blind spot when the cap is in the line of sight.

Yes, moves it up a little into the line of sight.
Upside is, it takes a few more inches of snow before your intake is blocked by it.

 

[Keesyman]

I grabbed this one off of AM General's parts website a few months back with an order or steering components.

Genuine Humvee Parts

Genuine Humvee Parts

genuinehumveeparts.com

 

[captkennyboy]

I used a standard flexible plumbing fitting like this: https://www.homedepot.com/p/The-Plu...2068304-92700062338492358&gclsrc=ds&gclsrc=ds

I think the 4" version works, but doublecheck the size.

thanks works perfect!