erasedhammer
Active member
- 843
- 61
- 28
- Location
- Maryland
So I took a trip in my humvee over a mountain pass to a town about 80 miles away (chuggin along at 50). Before I left I checked the tire pressures and they all were inflated correctly, taking note that the two rear tires were a little low. I get their, I do what I need to, then I come back home and check the air pressure of the tires as usual.
Now I have runflats in the two rear tires of my humvee, and I went to check the pressure of the rear two tires, and it was ZERO!
I had driven a total of 160 miles at 45-55 mph with two flat rear tires. I heard that you are not supposed to drive above 30 mph with flat tires and the runflats, so my question is, how did I not completely destroy the tires? or had an accident?
Also, is there any way to find out what type of runflats were installed? The rear tires are goodyear wrangler mt/r that were in bad condition when I bought the vehicle.
Now I have runflats in the two rear tires of my humvee, and I went to check the pressure of the rear two tires, and it was ZERO!
I had driven a total of 160 miles at 45-55 mph with two flat rear tires. I heard that you are not supposed to drive above 30 mph with flat tires and the runflats, so my question is, how did I not completely destroy the tires? or had an accident?
Also, is there any way to find out what type of runflats were installed? The rear tires are goodyear wrangler mt/r that were in bad condition when I bought the vehicle.