• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

How deep can a LMTV go...

ReoRider

Member
165
11
18
Location
Vermont
What's the problem, in 1942 the military had a solution for wet roads.
IMG_3140.jpgWas just out last weekend checking for any leaks in the axle air pressurization system. IMG_3175.jpg

Hardest part is always convincing yourself that it's just fine to keep on driving down the ramp.
IMG_3192.jpg

I do think that the LMTV can be made whole again. GPA / DUKW axles and hubs always need to be flushed and re-lubed after each season, no reason can't do the same with the modern stuff. Engine and electronics would seem to be the main concerns, but fresh water will take the edge off the job.
 

coachgeo

Well-known member
5,147
3,462
113
Location
North of Cincy OH
How well it survived probably has a lot to do with how much water got into cab electronics and Tranny Computer. (and engine computer if A1)
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,258
1,759
113
Location
Dayton, OH
While salt worse is worse virtually all the problems occur with any water intrusion (yes, fresh too).

The water is sucked up into the wire and rinsing it off the outside does not help. That's one reason (the main reason) to avoid flood vehicles. Period.
 

mkcoen

Well-known member
Steel Soldiers Supporter
5,637
381
83
Location
Spring Branch, TX
When I was in claims any flood that reached the dash was a total loss no matter what. It wasn't worth the years of people coming back years later with electrical issues.
 
Top