How many turns for combat mode.

[Matt0729]

How many turns does it take to go into combat mode on the fuel shut off. Is it a for sure thing that it will bypass all electrical. I got one rotation of the knob and had to use pliers.

 

[simp5782]

All the way in

 

[Floridianson]

Start putting lube on the threads and get it working good and just finger tight till full open or closed. I forget how many complete turns . More than one turn and less than fifty.

 

[simp5782]

All the way in is bypass. One turn out from that the magnet can close.

 

[WillWagner]

Combat mode? Does the TM REALLY call it that?

 

[Matt0729]

Just trying to rule out every possibility before i get an injection pump. Thanks to Wes simpsons video I will attempt the removal install myself. What does everyone think about rebuilds. C&C wanted about $2000

 

[simp5782]

Just trying to rule out every possibility before i get an injection pump. Thanks to Wes simpsons video I will attempt the removal install myself. What does everyone think about rebuilds. C&C wanted about $2000

Rebuilds are $750 or so. That is on the top end. You can check with Taylor Diesel in Memphis. They do most pumps for under that price.

 

[Matt0729]

Yeah that's a lot more reasonable. There's a lot of mixed reviews of rebuilds on the internet but I guess not everything you read on the internet is true.

 

[simp5782]

Yeah that's a lot more reasonable. There's a lot of mixed reviews of rebuilds on the internet but I guess not everything you read on the internet is true.

I run them for lots and lots of miles. And yes those are my videos on YouTube you have been watching

 

[Crf450x]

Combat mode? Does the TM REALLY call it that?

Not likely considering all pt pumps have that. I don’t know why but it kills me when people think these things are full of military only specialties

Just trying to rule out every possibility before i get an injection pump. Thanks to Wes simpsons video I will attempt the removal install myself. What does everyone think about rebuilds. C&C wanted about $2000

No idea on cost but the place I always see recommended is premco.

 

[simp5782]

It's actually called battle short mode and this is specific to any piece of military equipment, not just the pt pumps.

Battleshort (sometimes "battle short") is a condition in which some military equipment can be placed so it does not shut down when circumstances would be damaging to the equipment or personnel. The origin of the term is to bridge or "short" the fuses of an electrical apparatus before entering combat, so that the fuse blowing will not stop the equipment from operating.


The gennys have the button on it listed as battle short.