• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

How to install HMMWV brushguard with bumper?

jpinst

Member
387
5
18
Location
Hong Kong/Long Beach
I have searched the forums and can't seem to find any information on how to get my NOS Green brush guard on my M998.

I have one of those small bumpers in the front with three holes in it and tow hooks. Does that have to be removed?

I like of like it. Is there a way to keep it and the tow hooks, or do I need to buy a different brush guard?

Here are some pics. Any advice or opinions would be appreciated.
 

Attachments

davidkroberts

Active member
1,453
23
38
Location
west tennessee
if i remember right you have to use pins on part of the install or you cant raise the hood. I thought i remember it being a different bumper that took that brushguard but thats been too many beers ago i guess.
 

CdnH1

New member
33
0
0
Location
Prince George, BC, Canada
The 2 "L" shaped brackets attach to your bumper using 2 bolts each. Then the brushguard get attached to the brackets. The bolts to hold the brushguard in place go into the bottom holes and the pins go into the top holes. The metal stops on the brushguard face outwards. Just don't forget to take out the pins and lower the brushguard out of the way before you open the hood lol.

I hope this helps.
Cheers, Bob
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks