Hub and Drum Bolt Question

[meumar]

Does anyone know where I can get this bolt for the hub and drum assembly (figure 111): TM 9-2320-361-20P, PN 10896689? The ever illuminating TM simply calls it a "Bolt, ribbed shoulder." After some Google searching it comes out to something like hex-head, 3/8-24 x 1 3/16, thread length 5/8 in.

 

[Jeepsinker]

If I were you I would shop around with some of our vendors. That's probably your best bet.

 

[welldigger]

Are you talking about the bolts that hold the drum to the hub flange? I think I have a few if that's what your talking about.

 

[ke5eua]

I don't have the tm up in front of me, but is this the bolt that secures the inspection plate on the drum.

If so that is a ribbed type bolt but has a hex head on the back.

 

[meumar]

Are you talking about the bolts that hold the drum to the hub flange? I think I have a few if that's what your talking about.

No, this is the one that holds the dirt deflector and the drum adapter to the brake drum.

 

[meumar]

That's the one.

 

[DieselBob]

Here is a pic of the TM diagram

 

[Jeepsinker]

What did you break some off?

 

[welldigger]

Sorry I wasn't sure of the exact name of those bolts. But I do think I have a few in a spare flange I have laying around. I can post a picture tomorrow.