JSharp6182
New member
- 8
- 0
- 1
- Location
- Knoxville Tennessee
Flipped the hubs, now what?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Hub Flip
- Thread starter JSharp6182
- Start date
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Turn your wheels around like the fronts.
- 26,246
- 1,179
- 113
- Location
- NY
Flip 'em back...Flipped the hubs, now what?
rat4spd
New member
- 652
- 10
- 0
- Location
- Evansdale, Iowa
Then do it again three times.
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Yup.
- 9,604
- 1,493
- 113
- Location
- mid- michigan
Or get Gimpy to show him how to flip the whole truck.
Carl_in_NH
Member
- 834
- 7
- 18
- Location
- Wilton NH
Some fender flares and you're good to go.
RedbeardTheZombieHunter
New member
- 702
- 4
- 0
- Location
- Darrington, Washington.
Now go get yourself a set of Michelin 46" 395 XML radials and put all 6 wheels on the same direction as the fronts, then stand back and admire how much cooler your truck looks!
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
Hub Flips
Hmmm..You could uv' just takem off the inner wheel for "tracking" better. and the fronts could be "un-riveted and welded to width of rears. Better stance tracking (all six) and Looks. (see picture) easier to do I thought) see picture.
Also (see T.M.s)..Sorry..BUT those rear wheels on flipped hubs are Supposed to be facing Inwards...bearing load. (with larger tires they will stick even more (out than the..fronts..))
Hmmm..You could uv' just takem off the inner wheel for "tracking" better. and the fronts could be "un-riveted and welded to width of rears. Better stance tracking (all six) and Looks. (see picture) easier to do I thought) see picture.
Also (see T.M.s)..Sorry..BUT those rear wheels on flipped hubs are Supposed to be facing Inwards...bearing load. (with larger tires they will stick even more (out than the..fronts..))
Attachments
JSharp6182
New member
- 8
- 0
- 1
- Location
- Knoxville Tennessee
Well I took your advice and got me some 46's but the durn thing wouldn't hardly turn when I mounted em like that so I turned em around.
Attachments
Tennessee Colonel
New member
- 11
- 71
- 0
- Location
- TN
...And I thought he was really on to a new trend in deuce modification. Where's your sense of humor?
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
We just got served!
Tennessee Colonel
New member
- 11
- 71
- 0
- Location
- TN
Served What?
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
He pulled a fast one on us, he baited our hooks, he took us for dolts! He knew what to do and had already done it in fine fashion! He just wanted "to pull our chains"!
Nice look on the truck! Good job!
Nice look on the truck! Good job!
Tennessee Colonel
New member
- 11
- 71
- 0
- Location
- TN
Haw-Haw-Haw... now that is funny!