Hub socket

[jimm1009]

I understand the socket for the front hub nuts is 3 inch. Anyone have a a line on the
socket designed for this? I know that SnapOn and Mac have it but don't need it that bad.
There should be a manufacturer for the thin wall ones similar for use with the older M38 and CJ series jeeps.
Thanks,
Jim
jimm1009@yahoo.com

 

[acetomatoco]

Aren't all the hubs the same.. front rear and the spring saddle? I believe they are 8 sided.

 

[jasonjc]

KD tools make them $20-30 I think.

 

[ah1955]

A 3 inch 8 pt. 3/4 drive would be an OTC1907 avalable at truck parts supply houses, about 25.00. Don't recall what the name is on the wheel sockets that I have at work but our parts guy gets them for my at a real good price and they all use the same numbers as OTC.

 

[Srjeeper]

ToolDiscounter.com has them for $18.86-- OTC-1907 is the number.

 

[cbvet]

Got mine at NAPA.
Don't remember cost, so it must not have been too bad.
Eric
CBVET

 

[jimm1009]

Thanks for the really fast replies.
Sure is nice to get such quick answers to the problem.
Think Green!

Jim

 

[jimm1009]

Tool Discounter had it in stock. $31.00 including UPS ground.
Not too bad and I will have the right tool for the job.
Thanks again
Jim

 

[Big Mike's Motor Pool]

chucks trucks in orlando sells them. they also ship

 

[chevycrew]

Mine was about 30 at my local napa.

Part number is KDS2445 KD Tools is the brand.