Hummer Guy
Well-known member
- 843
- 807
- 93
- Location
- United States Louisiana
Anyone knows what's the name of these strips, I been trying to one for over a month. Mines is bent so I can't mount my tubular bumper on
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Humvee Front Bumper Mount
- Thread starter Hummer Guy
- Start date
- 2,975
- 4,356
- 113
- Location
- Olympia/WA
A quick look in the parts manuals for the word "brushguard" only came up with 2 pages for the A0-A2 series trucks, and one page in the ECV/REV manual.
They have different brackets in the first manual, but here is the page from the second manual.
Unfortunately, like a lot of parts for these, they use the most basic description possible so searching for it by it's name is worthless.
The word "bracket" shows up 347 times in the first parts manual part 1, and the same for part 2 of that, so almost 700 times.
In the ECV/REV manual it shows up 927 times
They have different brackets in the first manual, but here is the page from the second manual.
Unfortunately, like a lot of parts for these, they use the most basic description possible so searching for it by it's name is worthless.
The word "bracket" shows up 347 times in the first parts manual part 1, and the same for part 2 of that, so almost 700 times.
In the ECV/REV manual it shows up 927 times
- 6,930
- 9,587
- 113
- Location
- Papalote, TX
Why don't you straighten it? Does not look too bad to me.
Hummer Guy
Well-known member
- 843
- 807
- 93
- Location
- United States Louisiana
I attempting that and had no results, maybe if I try heating it up, it'll work
Hummer Guy
Well-known member
- 843
- 807
- 93
- Location
- United States Louisiana
Another question, that mount on the side, what is that made for? Is that for the luverne style bumper?
- 2,975
- 4,356
- 113
- Location
- Olympia/WA
That "mount" next to it is for a D-ring type shackle for the wider part, then the lower hole is where the towbar would attach.
- 1,502
- 1,676
- 113
- Location
- Puget Sound, WA
Talk to Steven at RWH - he might have one if anyone does.
- 6,930
- 9,587
- 113
- Location
- Papalote, TX
It would be best to remove it then straighten it, should not be much work, I did see one online dealer that had them for around $75 + SH, a little oxy/acetylene is much cheaper.
springer1981
Well-known member
- 844
- 1,150
- 93
- Location
- Maine
You'll be able to straighten it easily. I straightened a rear airlift bumper with a torch and a ratchet strap. https://www.steelsoldiers.com/threads/my-new-1992-m998-avenger.184818/post-2200967
Hummer Guy
Well-known member
- 843
- 807
- 93
- Location
- United States Louisiana
I know it's an old dead thread, but I finally got back to this. I used a torch and an iron mallet and was able to straighten it within 10 mins
- 16,761
- 24,068
- 113
- Location
- Burgkunstadt, Germany
Unfortunately, like a lot of parts for these, they use the most basic description possible so searching for it by it's name is worthless.
The word "bracket" shows up 347 times in the first parts manual part 1, and the same for part 2 of that, so almost 700 times.
In the ECV/REV manual it shows up 927 times
I have used TM's almost my whole life. I have never used the search function. The TOC will give you a place to start, and its up to you to LOOK. You can't tell me it was faster to use search.
- 2,975
- 4,356
- 113
- Location
- Olympia/WA
For someone that isn't as familiar with the manuals, then search function can save time.
For someone that actually understands the manuals and uses them regularly, not so much.
in this regard, many things are easier with paper manuals as you can mark or highlight the pages you look at repeatedly. Not as easy on a computer.