- 1,199
- 454
- 83
- Location
- Spartanburg,SC
After wanting to try this for some time, I finally got it accomplished this weekend. I contemplated installing it several ways but this seemed to work just fine and wasn't too much trouble. I ordered a 4 door central lock kit remote control conversion from Amazon and 2 barrel bolt locks. Around $30 total. The pictures should explain how everything went in. I added a safety to unlock the doors from the inside just in case the Chinese made actuator decided to quit while in the truck.
![20160731_141349.jpg 20160731_141349.jpg](https://www.steelsoldiers.com/data/attachments/434/434418-7ca28d903eb1147e25653b7efdb13fe1.jpg)
This is how it's mounted but flipped and installed on the inside of the door. I welded a nut on the end to connect the actuator.
![20160731_150704.jpg 20160731_150704.jpg](https://www.steelsoldiers.com/data/attachments/434/434419-78f9e65b6e169bdcfc8d59d5365d7e0b.jpg)
This is my safety override wire in case someone gets locked in with a bad actuator.
![20160731_161807.jpg 20160731_161807.jpg](https://www.steelsoldiers.com/data/attachments/434/434420-d99c53f2ce7630d8e7880a3c5e061764.jpg)
Installed and complete. Just drill a hole in the door jamb and install the cover plate.[h=1][/h]
![20160731_141349.jpg 20160731_141349.jpg](https://www.steelsoldiers.com/data/attachments/434/434418-7ca28d903eb1147e25653b7efdb13fe1.jpg)
This is how it's mounted but flipped and installed on the inside of the door. I welded a nut on the end to connect the actuator.
![20160731_150704.jpg 20160731_150704.jpg](https://www.steelsoldiers.com/data/attachments/434/434419-78f9e65b6e169bdcfc8d59d5365d7e0b.jpg)
This is my safety override wire in case someone gets locked in with a bad actuator.
![20160731_161807.jpg 20160731_161807.jpg](https://www.steelsoldiers.com/data/attachments/434/434420-d99c53f2ce7630d8e7880a3c5e061764.jpg)
Installed and complete. Just drill a hole in the door jamb and install the cover plate.[h=1][/h]