I need bumper clevises please

[oldshep]

I need 2 of the stock bumper clevises for my bobbed truck. You know the ones that mount on the top. Does anybody have some laying around. Thanks.

 

[ETHOS]

i am also in need of one

 

[DUG]

I need one too - stolen in Barstow while I was waiting for my EUC.

 

[oldshep]

i dont even need the pins in them. im going to put bolts though them. i just need the ones that fit the bumper flush.

 

[BFR]

I have to ask. Which ones are you calling "stock"? I know of three different styles that are used. They look alot alike, but are not the same.

This is where someone like DD comes in and says why they changed.

Just the same....if you guys can't get them anywhere closer, etc. PM me. I have all the styles in a pile. So I will need to know which ones you want. $10 a pop plus the stamp. Some may not have the safety pin and chain on them. But I don't think that many people want them that I'll run out of decent completes clevises.

I would be very interested if you have a couple of the ones that use 7/8" pins (as far as I know these were only used on the gassers)

 

[CARNAC]

Westfolk is right. Do you want the ones that bend down 90 degrees? The straight ones?

 

[docfarmall]

I have a bunch of them drop me a pm

 

[hndrsonj]

BFR, The ones you are talking about are the same p/n as the those on rear of a gasser.

 

[Lex_Ordo]

Try here. 1 5 TON 800 SERIES SHACKLE 12301040 MILITARY NOS:eBay Motors (item 250221138427 end time Oct-21-09 18:17:41 PDT)
I found this guy on ebay.
Saturn also has them, as well as TnJ Murray.

 

[FormerNewMVGuy]

You could also Pm EMR on here, He has a sh!t load of em!