• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

I need some help identifying a part.

Erik Jenkinson

Erik Jenkinson

Member
121
8
18
Location
Metairie, LA
On my m1009, on the drivers side rear of the engine, there is some sort of brass sensor with a pigtail running to it. I believe the wires were black and yellow, but I may be mistaken. What is it? Temp sensor? I need the pigtail for sure, mine is dry rotted bad. The part was two pieces that could be pulled apart. It has a white plastic housing.
 
Last edited:
Warthog

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
224
63
Location
OKC, OK
One way to figure out what any part is:

open the parts manual and look at the pictures.

When you find the picture, look at the part number and then you can google it.
 
You must log in or register to reply here.
109,290members
164,277threads
2,311,820posts
611online users
Top