dkydfireman
New member
- 15
- 0
- 0
- Location
- nova scotia canada
Hey guys. I have a m1008 that I use to haul green firewood. I work on the side with a tree care company and I'd like to be able to haul as much wood as possible from jobsites in one trip. I had a load of hardwood the other day that was almost level with the top of the cab (I'm sure I was way overloaded).
It was wondering a little bit on the road but I had no problems stopping or accelerating and it was squatting pretty good in the rear.
Has anybody put a set of airbags or helper springs in or had a leaf or two added at the spring shop?
I'm looking to increase the payload capacity by 1000lbs or so. That should be enough for what I'll be doing.
I know the easiest route would be to put m1028 springs in it but I'm in Canada and they just aren't easy to find up here.
It was wondering a little bit on the road but I had no problems stopping or accelerating and it was squatting pretty good in the rear.
Has anybody put a set of airbags or helper springs in or had a leaf or two added at the spring shop?
I'm looking to increase the payload capacity by 1000lbs or so. That should be enough for what I'll be doing.
I know the easiest route would be to put m1028 springs in it but I'm in Canada and they just aren't easy to find up here.