Jeepin46
New member
- 7
- 0
- 1
- Location
- Tualatin, Oregon
1971 M35 A2. According to rebuild tag on IP, rebuild date 1989. I was getting about 1 gal of diesel in the oil per 120 miles or so. I pulled the injection pump and replaced the two o-seals on the head (thanks Bottleworks).
Next I pulled the booster pump off the IP and took it apart. The seal there seams tired. I took the housing by NAPA and they measured as best they could (with the seal still in the housing). Best they could figure was it might be NAPA Seal # 4231 and it was about 1000 miles away. Before I go and order it, and pay extra for shipping, does anyone know where I could get "the official" seal for the booster pump? It is the seal that keeps the diesel and oil apart as in the attached pic. I have called a few places and, it seems to be a hard one to find.
Also, I have the TM9-2910-226-34, but there seems to be no parts version.
Next I pulled the booster pump off the IP and took it apart. The seal there seams tired. I took the housing by NAPA and they measured as best they could (with the seal still in the housing). Best they could figure was it might be NAPA Seal # 4231 and it was about 1000 miles away. Before I go and order it, and pay extra for shipping, does anyone know where I could get "the official" seal for the booster pump? It is the seal that keeps the diesel and oil apart as in the attached pic. I have called a few places and, it seems to be a hard one to find.
Also, I have the TM9-2910-226-34, but there seems to be no parts version.
Attachments
-
38.1 KB Views: 89