Injector Pump

[Barneyszoo]

Ok, OK, I know this has been beaten to death. But want to make sure, to turn up the fuel on the pump, there is a sleave like cover that is safty wired with two 7/16 nuts under or inside (if thats better.) a small stem needle valve with an allen socket on it. Is this the ajustment to increase the fuel. I've looked through alot of passed forums and theres still a question in my mind. I KNOW, I KNOW, I'M SORRY.

 

[Divemaster920]

alot is 2 words....a lot
I KNOW, I KNOW, I'M SORRY

 

[Barneyszoo]

Cool, thanks, I think that means thats it?

 

[Jake0147]

Below that, two 7/16 inch head bolts to hold anothere cover, under that two half inch hex nuts make the adjustment, no allen screws. If you don't have to grind one of your half inch wrenches in half, you've probably got the wrong adjuster.

 

[Barneyszoo]

Now i'm getting confuesed. Are there different pumps out there?

 

[cranetruck]

Jake is referring to the adjustment of the stop block on the FDC.

 

[Barneyszoo]

Thanks for the pix, is it the tow nuts and threded rod at the bottom of the pix next to the words HOW MUCH OF THE THREDED ROD IS SHOWING?

 

[Divemaster920]

http://www.steelsoldiers.com/deuce-modification-hot-rodding/1118-turn-up-fuel.html