• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Installation of Passenger Side Floor Insulation

Augdog1964

Member
522
15
18
Location
Richmond, IN
hey all,

So does anyone have step by step instructions for removing and installing new passenger floor insulation (front)... looks like the heater box has to come out?
I sure hope not...

LOL
 

DREDnot

Well-known member
725
445
63
Location
Phoenix, AZ
To do it right, the heater box has to come out.

Lazy me just cut the pad as far up as I could reach. There is a hold down strip in front of the battery box that has four screws and that should be it.
 

cwc

Active member
Steel Soldiers Supporter
307
153
43
Location
Sweeden, KY
The heater does not have to come out completely. The hoses can stay attached, also the rubber duct on the side that attaches to the body vent. But the four bolts going into the air filter area do have to come out.

Sent from my E6910 using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks