Kingpin
New member
- 7
- 0
- 0
- Location
- Oklahoma City
I've read most of the threads on insulating the floors and roof. Lots of contrasting opinions across the internet.
I'd like to hear from some people who've insulated the doors of their m1009. I need to deaden the noise and stop the draft coming through the handle and up the window. I'm fairly well-read on dynamat, fatmat, raamat etc...
I'd like to hear from people who've been able to warm the cab and quiet it at a reasonable cost. Right now we're working in this order:
1. insulating the hood (cheapest) with dynamat in single layer spots and and then a hood pad with foil from Pepboys
2. Great stuff low expansion spray foam in the roof and supports
3. Doors with sound mat and some kind of insulating pad
4. Wheel wells and drive shaft area with some sort of spray deadener (suggestions??)
5. Lastly the floor and firewall. This is last because the previous owner had layered in carpet and a thick pad so it has been deadened some. I will be pulling it up and adding sound mat, then a pad (perhaps jute) , and then an industrial carpet.
I welcome any suggestions you guys might have. This website has been a tremendous help to me and my son!!
I'd like to hear from some people who've insulated the doors of their m1009. I need to deaden the noise and stop the draft coming through the handle and up the window. I'm fairly well-read on dynamat, fatmat, raamat etc...
I'd like to hear from people who've been able to warm the cab and quiet it at a reasonable cost. Right now we're working in this order:
1. insulating the hood (cheapest) with dynamat in single layer spots and and then a hood pad with foil from Pepboys
2. Great stuff low expansion spray foam in the roof and supports
3. Doors with sound mat and some kind of insulating pad
4. Wheel wells and drive shaft area with some sort of spray deadener (suggestions??)
5. Lastly the floor and firewall. This is last because the previous owner had layered in carpet and a thick pad so it has been deadened some. I will be pulling it up and adding sound mat, then a pad (perhaps jute) , and then an industrial carpet.
I welcome any suggestions you guys might have. This website has been a tremendous help to me and my son!!