jmenende
Well-known member
- 468
- 400
- 63
- Location
- Puerto Rico
Howdy boys. Looking to upgrade the oil pan on my m1008. Any ideas.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Is there a performance oil pan for the m1008?
- Thread starter jmenende
- Start date
Barrman
Well-known member
- 5,274
- 1,796
- 113
- Location
- Giddings, Texas
Upgrade for what purpose? If you want more oil capacity then a HMMWV oil pan for the 6.2 is your ticket. 2 gallons needed for an oil change. Just make sure it is a 6.2 oil pan. The 6.5 oil pans had a single piece rear main seal and the oil pan won't fit.
If some kind of oil cooling is your goal. Just add another cooler to the oil cooler circuit.
If some kind of oil cooling is your goal. Just add another cooler to the oil cooler circuit.
jmenende
Well-known member
- 468
- 400
- 63
- Location
- Puerto Rico
The one i have looks like it took a solid blow and it has about a 10" weld scar across the bottom. I was just looking for something to carry more oil and keep it cooler. Im going to look at the hmmwv 6.2l oil pan. thanks for the sugestions.