• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

ISSPro gps speedometer

MatthewWBailey

Thanks for this site. My truck runs great now!
Steel Soldiers Supporter
863
1,567
93
Location
Mesa Colorado
IssPro is asking me to demo/beta test their new GPS speedometer. It's a 3-3/8" form factor and has 80, 100, 120 ranges. I bought 3 gauges (tach & 2 voltmeters) from them earlier in the year so they offered me to test this. I'm using a gps unit from
MotorMeterRacing at present and it's 'ok' but really meant for marine apps. I'll post pics once Iss sends me the demo unit.
 

dr3d

Member
29
62
18
Location
Gulf Coast, Texas
Quick Q.

The motometer or ISSPro ... do either or both use a remote GPS antenna?

I have an unbranded unit which I am very hesitant to install since I'm near sure my deuce's 1/8 steel dash will block anything resembling a sattelite signal.
 
Last edited:

MatthewWBailey

Thanks for this site. My truck runs great now!
Steel Soldiers Supporter
863
1,567
93
Location
Mesa Colorado
Quick Q.

The motometer or ISSPro ... do either or both use a remote GPS antenna?

I have an unbranded unit which I am very hesitant to install since I'm near sure my deuce's 1/8 steel dash will block anything resembling a sattelite signal.
Both use remote antenna. The MMR antenna looks like this..
IMG_4760.jpeg
 

MatthewWBailey

Thanks for this site. My truck runs great now!
Steel Soldiers Supporter
863
1,567
93
Location
Mesa Colorado
Why would you want a GPS speedo? The ECM outputs a pulse per mile signal.....

:unsure:

I am considering this (which does have GPS as well):

I have it now bc the 3.07 gear change that MME did, was not accompanied by an appropriate change in the ECM. So the original speedo was off by about +10%. Surprise! They didn't do it right obviously. Then it got way worse when I added the ECO's lol.

Now With your reprogram, once I put 3.90s back, the old speedo should be good. However, I do kinda like the COG feature for off roading out here where there's no trail. So I'm torn.

Also, how much error is introduced in the pulse per mile speedo when we Air down CTIS a lot?
 

Ronmar

Well-known member
3,881
7,547
113
Location
Port angeles wa
I have it now bc the 3.07 gear change that MME did, was not accompanied by an appropriate change in the ECM. So the original speedo was off by about +10%. Surprise! They didn't do it right obviously. Then it got way worse when I added the ECO's lol.

Now With your reprogram, once I put 3.90s back, the old speedo should be good. However, I do kinda like the COG feature for off roading out here where there's no trail. So I'm torn.

Also, how much error is introduced in the pulse per mile speedo when we Air down CTIS a lot?
depends on how much slippage/wheel spin you have:). in the end the same amount of tread covers the same distance over the ground, there is just more of it in contact with the earth at any given time at a lower pressure...

What is Isspro asking for one of those jewels?
 
Last edited:

MatthewWBailey

Thanks for this site. My truck runs great now!
Steel Soldiers Supporter
863
1,567
93
Location
Mesa Colorado
depends on how much slippage/wheel spin you have:). in the end the same amount of tread covers the same distance over the ground, there is just more of it in contact with the earth at any given time at a lower pressure...

What is Isspro asking for one of those jewels?
They have not revealed their pricing as yet. Apparently they're sending me a demo unit before they finalize the design.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks