I'm looking forward to building you the best 1009 I can!Great job HAWKMAN, Cant wait till you put mine together!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Junker to Jewel pics - diamond in the rough...
- Thread starter maddawg308
- Start date
badassissimo
New member
- 236
- 1
- 0
- Location
- Iowa, la
nice truck. how much does one of these cost at the junk level? I just like the look when it looks like it'll fall apart. lol.
badassissimo
New member
- 236
- 1
- 0
- Location
- Iowa, la
sorry, still learning. This truck.
earnie
Member
- 171
- 0
- 16
- Location
- seattle ,washington,usa
wtf was that a demill or what happened to her
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
all new backseats. paint...new hardtop...rhinoline cab and bed...new seats. no pics of cab inside redone...
Attachments
armytruck63
Active member
- 1,663
- 10
- 38
- Location
- Redlands, CA
Hey srodocker, what kind of wood did you use for your troop seats? Mine are fiberglass, but I want to make new wood for my headache rack. Thanks, Matt
blitzengine
New member
- 87
- 7
- 0
- Location
- Valdosta,GA
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
i believe its just pine my dad used from home depot.
- 18,541
- 5,852
- 113
Excellent thread here....
Like diamond in the rough, finely polished to beautiful gems.
Beauty is in the eyes of the beholder... It takes VISION to see the end product when it's in the bone-yard.
Like diamond in the rough, finely polished to beautiful gems.
Beauty is in the eyes of the beholder... It takes VISION to see the end product when it's in the bone-yard.
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
Barrman, do I see a cobra in the background?
parlusk
Member
- 277
- 3
- 18
- Location
- southwest virginia
i have spent way to many hours looking at pics
- 10,865
- 762
- 113
- Location
- Appomattox, VA
BTT for those who are newer to the site. Got any vehicles you restored that started off as moose turds that you turned into the Mona Lisa?
- 4,218
- 3,265
- 113
- Location
- Near Austin, Texas
I don't have the pictures of when the V was taken off the firing range, my first one here is the bare hull after the holes were patched up, then sandblasting and priming.
Hopefully it looks junky enough!
http://www.steelsoldiers.com/cadillac-gage-v100/23235-new-v-100-a.html
Cheers.
.
Hopefully it looks junky enough!
http://www.steelsoldiers.com/cadillac-gage-v100/23235-new-v-100-a.html
Cheers.
.
Attachments
Last edited:
Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
Wow Rory. I had forgotten or never heard yours was a target hull. Amazing come back.
Somehow I also missed the question a few post up about one of my other addictions. British cars. No, no Cobra. That is a 1957 MGA. My wife wants it to be her daily driver some day. I convinced her it needed a real engine. Since the original British stuff was trash, the wood floors were gone and all. There is now a 1962 Corvette 283 V8 under the hood with a 1989 Camaro T5 behind it. Work has been stopped for a few years because of my Green Iron addiction. Actually, I got a really nice M35 hood from Warthog in February of 2009. It is all painted and ready to go on the Gasser M35 to finish that truck out. It is sitting on the MGA now with M35 cargo covers, a cab cover, a M105 cover and a M101 cover. You really can't see the MG anymore.
Here is the M35 Gasser with the a non drop side bed and the entire truck the same color. I took both M35's to a boy Scout parade a year ago.
Somehow I also missed the question a few post up about one of my other addictions. British cars. No, no Cobra. That is a 1957 MGA. My wife wants it to be her daily driver some day. I convinced her it needed a real engine. Since the original British stuff was trash, the wood floors were gone and all. There is now a 1962 Corvette 283 V8 under the hood with a 1989 Camaro T5 behind it. Work has been stopped for a few years because of my Green Iron addiction. Actually, I got a really nice M35 hood from Warthog in February of 2009. It is all painted and ready to go on the Gasser M35 to finish that truck out. It is sitting on the MGA now with M35 cargo covers, a cab cover, a M105 cover and a M101 cover. You really can't see the MG anymore.
Here is the M35 Gasser with the a non drop side bed and the entire truck the same color. I took both M35's to a boy Scout parade a year ago.
Attachments
- 4,218
- 3,265
- 113
- Location
- Near Austin, Texas
Tim, your gasser came out really nice. ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
And it is much appreciated that you come so far to take part in events with not one, but TWO deuces!
The V's life as a target was not an easy one, she got hit several times. There were cannon sized holes through her nose, right side, and back. Lots of bullet and shrapnel strikes here and there inside and out. One was to the power plug holders for the intercom, that was entertaining to fix.
I left a hint of the scars if you know where to look, they are part of her history.
Cheers
And it is much appreciated that you come so far to take part in events with not one, but TWO deuces!
The V's life as a target was not an easy one, she got hit several times. There were cannon sized holes through her nose, right side, and back. Lots of bullet and shrapnel strikes here and there inside and out. One was to the power plug holders for the intercom, that was entertaining to fix.
I left a hint of the scars if you know where to look, they are part of her history.
Cheers
Metternacht
Member
- 104
- 0
- 16
- Location
- Southern CA
I nominate Zout's Current Jeep Project. And the M37 Ambulance he is Doing with Papabear and CAMO.
That man can make rust reform into metal. Maybe we can get them to post up a few pics.
That man can make rust reform into metal. Maybe we can get them to post up a few pics.
APM215
New member
- 474
- 9
- 0
- Location
- Bradford. ON. Canada.
This was my old M215. sold now and I miss it.
Attachments
- 10,865
- 762
- 113
- Location
- Appomattox, VA
Good save of the V-100, Rory! I'm surprised it wasn't in worse shape from being out on the range. How were you able to get it from the military range? Do they sell them as scrap?
- 4,218
- 3,265
- 113
- Location
- Near Austin, Texas
It was bought off the range as scrap metal, and thats basically what it was. I wasn't involved in that and don't know all the details, unfortunately.
Another chap bought the hulk and welded up all the holes, then rebuilt the engine, transmission, and axles to 0-hour condition. He also gathered loads of spare parts.
He gave up on the project for financial reasons and it sat for a while, at which time I got involved and brought it on up to its current state (which took almost 3 years!).
I don't have any pictures of it as originally recovered, though I wish I did. With luck they might show enough for me to establish its Army identity number, which I have thus far not been able to do. With that number, I might be able to pick it out of period Vietnam photos.
Much of what I know of its history is from the hull number, which you had to give Cadillac Gage when you ordered parts since the V production run didn't use mark numbers.
Cheers
Another chap bought the hulk and welded up all the holes, then rebuilt the engine, transmission, and axles to 0-hour condition. He also gathered loads of spare parts.
He gave up on the project for financial reasons and it sat for a while, at which time I got involved and brought it on up to its current state (which took almost 3 years!).
I don't have any pictures of it as originally recovered, though I wish I did. With luck they might show enough for me to establish its Army identity number, which I have thus far not been able to do. With that number, I might be able to pick it out of period Vietnam photos.
Much of what I know of its history is from the hull number, which you had to give Cadillac Gage when you ordered parts since the V production run didn't use mark numbers.
Cheers
- 10,865
- 762
- 113
- Location
- Appomattox, VA
Any more from the newer members?