• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Kickdown adjustment.

Hooper

New member
294
0
0
Location
Grand Rapids
I've been paging through the TM's and don't see anything on the kickdown cable adjustment. Is it listed under something else? Is the adjustment in that little box just above the trans pan on the left side of the vehicle? My 923 up shifts way to quick and doesn't down shift going up hill.
 

jonesal

Mission Specialist
Steel Soldiers Supporter
413
69
28
Location
Brookings, SD
It's called "modulator and cable". See the adjustment sections of TM 9-2320-272-24-1, Volume 1, page 3-398 AND TM 9-2320-272-23-3, WP 0365, (page 0365-1).

Al Jones
'84 M923

 

Suprman

Well-known member
Supporting Vendor
6,848
664
113
Location
Stratford/Connecticut
I believe it controls fluid pressure the more it is screwed in towards the front of the vehicle the harder it shifts and the higher the shift point. PM member carlo he knows some about this adjustment
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks