DZelmer
New member
- 6
- 10
- 3
- Location
- Bridgman/Michigan
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
.
.These are the rest of the pictures i have. If more are needed i will have to get them when its not covered in snow.View attachment 914694
Ya there is plenty of water with the oil i ran it through a centrifuge once but its hard to get all the water out with out draining all the cyl. When i gotnthe rig i drained over 5 gallons of water out of the oil tank before i even got oil. At some point some one chooped the filter and or suction strainer apart in the tank also...found that hack job when i cleaned all the trash out of the bottom of the tank..
Well... It isn't a Hiab 750. I would bet that it is a Hiab though... When the snow clears, maybe on the back of the boom?
There should be a plate (ID Plate) on there.
Looking at the outrigger, it seems like the parts would be interchangeable.
Heck, for that matter if you can get the old packing back into the cylinder and if the screw-on cap will re-thread onto the threads you might be "fixed". Was the oil white like that before it hit the ground? Like it was contaminated with water?
.