- 3,923
- 76
- 48
- Location
- Comfort, Texas
"Turd Floater" Now that is funny. 
Thanks for the update.
Thanks for the update.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Last night GL win and another project
- Thread starter zout
- Start date
- Status
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Got home just a little while ago - got Adam and John all unhooked and loaded up and a few minutes to relax with friends - Bud also came down and left up here a few minutes ago as well - I only have ONE BITCH - I wish non of ya would have told him more 923's were left - you should have told him they were all SOLD OUT. Its gonna get ugly quick and someone deep in trouble if he gets one of these (few of ya know why).
ANYHOW - last pic of the M109A3 together at the DZ - also pic headed down the road this morning to CAMO.
Pics explain themself to the knowledgeable and can figure what they are.
CAMO - I just do not know how to explain just how superb the fellas are - the help in getting this all done and building a unique truck - M909.
Wreckerman had already dropped off the gunring - this was tied down to the back of the 109 chassis for the ride back home. With the chassis in tow with Adams towbar - box now on the new M909 - we headed out - just after getting on 85N - it was a monsoon for about 8 miles - GO HAHA - there is your 30% knucklehead - it felt good after a very humid day and also HOT out.
Pics at home unloading and unhooking and saying the goodbyes once again to friends.
ANYHOW - last pic of the M109A3 together at the DZ - also pic headed down the road this morning to CAMO.
Pics explain themself to the knowledgeable and can figure what they are.
CAMO - I just do not know how to explain just how superb the fellas are - the help in getting this all done and building a unique truck - M909.
Wreckerman had already dropped off the gunring - this was tied down to the back of the 109 chassis for the ride back home. With the chassis in tow with Adams towbar - box now on the new M909 - we headed out - just after getting on 85N - it was a monsoon for about 8 miles - GO HAHA - there is your 30% knucklehead - it felt good after a very humid day and also HOT out.
Pics at home unloading and unhooking and saying the goodbyes once again to friends.
Last edited:
- 7,744
- 154
- 63
- Location
- Columbus Georgia
seeing how PB lost his
camera - here are some more
camera - here are some more
- 7,744
- 154
- 63
- Location
- Columbus Georgia
last ones sneaking into the camera
THE HAHA told ya ones
THE HAHA told ya ones
- 2,732
- 863
- 113
- Location
- Oakwood, Ga
Yahooo you guys are back@!
- 2,732
- 863
- 113
- Location
- Oakwood, Ga
Typical Adam, driving around topless.
- 34,012
- 1,810
- 113
- Location
- GA Mountains
One word. Rainex! Tell Adam it works on glasses too!
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Glad eveything went well and you stopped by the truck wash on the way home. You either will need a bigger box or fender flares 
From the looks of it, that hot tub should fit on back porch. I like it about 108 degrees in October. 
From the looks of it, that hot tub should fit on back porch. I like it about 108 degrees in October. 
bigugh20
Member
- 361
- 0
- 16
- Location
- Mt. Pleasant/ SC
Well dang it man, that looks good. Adam finally got a bath, and you have a back porch to boot. Good job guys!
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Most exelent work gentleman!!
This is one awesome rig!
This is one awesome rig!
goldneagle
Well-known member
- 4,537
- 1,066
- 113
- Location
- Slidell, LA
Does anyone have pictures of the u-bolts and how they were used to attach the 109 box to the M923 frame?
- 7,744
- 154
- 63
- Location
- Columbus Georgia
NOPE - and I am not giving my mounting up - expect to tell ya that is how we did it. NO PICTURES - if it happens to make it to the GA RALLY in time you can just see it there.
The rain was only bad for about 20 min. Bud and I had a dry run back to Atlanta, and I spent the trip watching the left over parts on the chassis of the deuce, making sure that they stayed put.
It was great turning wrenches with Troy and Tony. I also found out that I cannot hold onto tools when someone is working under me. I peppered Zout with nuts, washers, and even a wrench or two.
It was great turning wrenches with Troy and Tony. I also found out that I cannot hold onto tools when someone is working under me. I peppered Zout with nuts, washers, and even a wrench or two.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,469
- 113
- Location
- Columbus, Georgia
Ah....now I understand...I thought when Zout kept yelling "YOU "&^%@#" and moth*!@%#$&^" he was just being impatient!!The rain was only bad for about 20 min. Bud and I had a dry run back to Atlanta, and I spent the trip watching the left over parts on the chassis of the deuce, making sure that they stayed put.
It was great turning wrenches with Troy and Tony. I also found out that I cannot hold onto tools when someone is working under me. I peppered Zout with nuts, washers, and even a wrench or two.
Yep it was impressive to see everybody working together and getting the mission accomplished.
I gotta tell ya though, Bud and I sure were tired when it was all done... watching that much work takes alot out of a feller!
Attachments
goldneagle
Well-known member
- 4,537
- 1,066
- 113
- Location
- Slidell, LA
If everyone here kept their innovation to themselves this site would become a MV repair site.
NeedMoreToys
New member
- 6
- -27
- 1
- Location
- Kronenwetter, Wisconsin
Congrts!
- 2,177
- 50
- 0
- Location
- Butler TN.
Purdy!
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,469
- 113
- Location
- Columbus, Georgia
Ok now, I know EMD(portajohn) and Ferro took LOTS of pics at every stage of the operation...so WTH are they??
Attachments
TiggersGF
New member
- 136
- 5
- 0
- Location
- Bristol VA
Dave could you please post a side view photo of the truck Matthew is geting so I can do some photo shop make ups of what he has on paper. Thank you! Matthew does a lot of things in his head, I need to see a piture of it.
wreckerman893
Possum Connoisseur
- 15,629
- 2,054
- 113
- Location
- Akenback acres near Gadsden, AL
Plenty of room in there for them.
- Status