Enforced_Leo44
Active member
- 128
- 78
- 28
- Location
- Parma, Italy
As the title says, my rear righthand brake caliper started to leak, vehicle is a 1988 M998, which means I already have the "dual purpose" rear caliper, that function as service AND parking brake
I looked around, there are a couple of rebuild kit that include all the little internal seals, specific for my kind of Humvee caliper, they sell for around 80$
There are also kits that only include the piston boot and the square cut seal that goes into the housing around the piston, which would cost way less and I think that I'd only need those because the leak comes from the piston itself, but I don't know if those are only for the front calipers
Which brings us to my question: are the boots and square cut seals for front and rear caliper identical/interchangeable or are those different from front to rear?
I looked around, there are a couple of rebuild kit that include all the little internal seals, specific for my kind of Humvee caliper, they sell for around 80$
There are also kits that only include the piston boot and the square cut seal that goes into the housing around the piston, which would cost way less and I think that I'd only need those because the leak comes from the piston itself, but I don't know if those are only for the front calipers
Which brings us to my question: are the boots and square cut seals for front and rear caliper identical/interchangeable or are those different from front to rear?