• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Leaking Fuel Injector Plate LDT 465

F

farrellm55

New member
1
0
0
Location
Yuba City, CA
I looked at the TM for the rebuild of the injector with no luck. On the back side of the IP facing the engine is a large rectangular plate that is leaking. It is held on by two small bolts. I am not sure if using loctite alone will cure this leak or if i should put a gasket on it. There does not appear to be a gasket on the "plate" at the present time... ANyone have any ideas...
 
WillWagner

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,761
113
Location
Monrovia, Ca.
You looked in the TM9-2910-226-34 ? There are exploded views in there. Is the plate on the governer end, or pump section? Can you snap a pic of it?
 
You must log in or register to reply here.
110,929members
165,338threads
2,326,693posts
866online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks