• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LED dash light questions

shannondeese

Member
651
17
18
Location
High Springs Fl
Harbor Freight has blue and red 12 LED strips for 8 bucks. They say 12Volt on them. I was under the impresion that LED's could work 12 or 24 volt. Does anyone know if they will work in the Deuce. Thanks.
 

cranetruck

Moderator
Super Moderator
Steel Soldiers Supporter
10,350
75
48
Location
Meadows of Dan, Virginia
LEDs are low current devices and a series resistor can easily get you the 12 volt drop if needed.
Some units have a built-in voltage regulator for a wide range of supply voltages (10 to 30 volts).
My experimental LED illumination shown in the image below. The LEDs are very intense and the light draws too much attention to itself IMHO, so I went back to the original incandescents as shown in other posts.
 

Attachments

robr

New member
436
2
0
Location
Wichita/Kansas
I have LED Lights like the ones Harbor Freight sells but mine are 24 volt white $8.00 each I got extras I dont need send me a PM if you want them
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks