LED Route Clearance Lighting

[gimpyrobb]

I got some of the bulbs, now I'm looking for brackets. Does anyone have a bracket they could measure for me? I have the ability to make the bracket if I could find some info on them.

 

[wsucougarx]

Hey Gimp, you looking for the "L" shaped brackets?

 

[gimpyrobb]

I guess I should have specified, sorry. I am looking to make the octagon that goes around the light and captures the lip.

 

[wsucougarx]

Getting some pics for you Gimp. Give me a couple minutes

 

[wsucougarx]

Hope this helps out:

 

[gimpyrobb]

Yup, helps a lot. Are all the flats the same length?

 

[wsucougarx]

The sides are all the same length.

 

[gimpyrobb]

Thank you.

 

[gimpyrobb]

Whats one of those sides length? I didn't think about that, so I can get a piece long enough to bend up.

 

[wsucougarx]

From bend to bend, the length is 2 3/4 inches (inside the bracket measurement)

 

[gimpyrobb]

Looks like I will start with a piece 25x1.50, thanks.

 

[Recovry4x4]

Duct tape the bulbs to the truck, it will be perfect.

 

[swbradley1]

Not perfect, he'd screw the duct tape up.




Good thing he doesn't get up before noon to see us talking about him.

 

[gimpyrobb]

I would use duct tape if I could find a color match. Sadly they don't have "Haspin brown" or "Georgia Red".

 

[Recovry4x4]

I would use duct tape if I could find a color match. Sadly they don't have "Haspin brown" or "Georgia Red".

I wouldn't worry about the Georgia red. Your truck was last there when????????

 

[Ferroequinologist]

Gimp would cover the bulb up with the duct tape!

Just pick a duct tape color and then paint your truck to match.

 

[gimpyrobb]

So mean!