papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
I'll be glad when youse guyz get the shelter erected so I can bring some of my toys up for storage!!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LME maintenance tent erection
- Thread starter swiss
- Start date
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Heck, I just might move the WC51 fron Texas is the landlord is willing. We can call it CAMO north. Right IFS? 
- 12,195
- 325
- 0
- Location
- gainesville, ga.
This from a wanta be weatherman who calls a monsoon "rain moving out"WTB
Looking for a 8 foot extension assembly, a 16 foot extension or full assembly if anyone is selling
ps: a little rain never hurt anyone m73819
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Ron is so sweet, he might melt!WTB
Looking for a 8 foot extension assembly, a 16 foot extension or full assembly if anyone is selling
ps: a little rain never hurt anyone m73819
- 5,368
- 3,378
- 113
- Location
- Lexington, South Carolina
He just did not specify where it was moving out FROM. Sounds like in this case it was the clouds.
- 12,195
- 325
- 0
- Location
- gainesville, ga.
So THIS was the reason you INSISTED on giving me that BIG smooch at last years rally.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
OMG!!! Would a MOD PLEASE delete that post?? Maybe...just maybe, that mental image would then be deleted and I can go back to work!!
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
To return our thoughts back to our regular programming.
Yes it was raining yesterday. Yes we got wet but we got it done. The frame is complete and on the blocks.
Now for those of you wondering why the blocks? Note now that 2 large trucks will fit side by side!!
The tricky part was lifting the last frame in place. I actually had to get in tractor bucket to lift the last frame up while we put legs on and put on Legos.
As noted in earlier pics I could only get a 20 foot section of pipe so we had to build the first three sections, move around as necessary with wrecker/tractor and then add the last section
It actually went according to plan with a lot of swearing and on the fly adjustments at each step
Stand by for adding the covers, cool plan on that one
Yes it was raining yesterday. Yes we got wet but we got it done. The frame is complete and on the blocks.
Now for those of you wondering why the blocks? Note now that 2 large trucks will fit side by side!!
The tricky part was lifting the last frame in place. I actually had to get in tractor bucket to lift the last frame up while we put legs on and put on Legos.
As noted in earlier pics I could only get a 20 foot section of pipe so we had to build the first three sections, move around as necessary with wrecker/tractor and then add the last section
It actually went according to plan with a lot of swearing and on the fly adjustments at each step
Stand by for adding the covers, cool plan on that one
Last edited:
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
P.s. Another reason for the height as you now have noted m73819 does not like to get wet and wanted extra height so we can do crane lifts under the cover and he not get wet.
glassk
Active member
- 998
- 6
- 38
- Location
- Hampton, GA
I have an 8 foot section of green fabric, might need some cleaning that you are welcome to , no transport cover though .
, I can drop it off at CAMO, if you want to look at it,
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Why would they run AC in a tent that looks like its in the arctic?!
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
I like the fact they probably have a flammable 55 gallon drum sitting next to the tent clearly labeled and full of explosive ordinances
Omg
rustystud
Well-known member
- 9,280
- 2,987
- 113
- Location
- Woodinville, Washington
We used to burn C4 explosive to heat our C-rations.
glassk
Active member
- 998
- 6
- 38
- Location
- Hampton, GA
This is a vinyl material and may very well be for the round top frames, I did have about fifteen of the canvas ones that I know were for the older ones, I'll have to look and see if it laces together like the temper tents or has the hooks at bottom, I saw LME and thought I would toss it out there. It is just going to be thrown away if nobody wants it.
The canvas worked for the Barn we were working on, 30 ft x 8 ft for tarps,..
I bought most of this stuff back in 2004 to 2006, got two scissor lifts for $650.
Attachments
Last edited:
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
NOOOOOOOOOOOOOOOOOOOOOOOOO
Take over to Camo please, I will get it from PB at some time!!!!!!!!!!!!!!!!!
Thank You!
- 12,195
- 325
- 0
- Location
- gainesville, ga.
Yes I
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Stonepicker has the drill. I didnt have swiss's number so I gave him rons. Expect a call soon.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Keith (glassk) if you can get it over to me I can take it to the GA Rally next month for swiss or maybe he will be passing thru here sooner.
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
Okay typical barn not big enough 
. I have 7 feet behind vehicles. Adding on 16 more feet
. I have 7 feet behind vehicles. Adding on 16 more feet