Lmtv bumper on mtvr

[JMFarms]

Anybody tried adapting an lmtv bumper onto your mtvr or have the dimensions between the tow hooks on an lmtv?

 

[JonM934]

This is not helpful but I was going to put a 5 Ton front bumper on my 7 Ton so I could have Steel instead of Aluminum but the sale was cancelled after they found out that they were out of 5 Ton bumpers. Dang. A guy down the street has a 1078 and I could ask him about the dimensions if you like. His is a 4x4 and not 6x6.

 

[JMFarms]

This is not helpful but I was going to put a 5 Ton front bumper on my 7 Ton so I could have Steel instead of Aluminum but the sale was cancelled after they found out that they were out of 5 Ton bumpers. Dang. A guy down the street has a 1078 and I could ask him about the dimensions if you like. His is a 4x4 and not 6x6.

That would be great if you don't mind. I'm with you, steel with a skid plate would be better.

 

[JonM934]

Here are photos showing a LMTV measurements. I am not sure it could be easily done because the LMTV bumper is triangle shaped.

Overall width:



Distance between mount points:



Height of bumper including the triangle part:

 

[Elijah95]

I put an MRAP bumper on my truck. If you don’t care about the tow-bar mounts, works great, nice and strong, just need to fab frame-extensions. Added winch mount location too where I mounted a Sherpa 25k

Sent from my iPhone using Tapatalk

 

[JMFarms]

Here are photos showing a LMTV measurements. I am not sure it could be easily done because the LMTV bumper is triangle shaped.

Overall width:

View attachment 826596

Distance between mount points:

View attachment 826597

Height of bumper including the triangle part:
View attachment 826598

Thanks so much for pictures and dimensions. It's close in size, but like you said would take some considerable effort and fabrication to fit.

Here are photos showing a LMTV measurements. I am not sure it could be easily done because the